13okt24
|
|
The Springmann vaporizer |
04/10/06 13okt24 |
|
Wenn you know english made pressure lanterns like Tilley and
Bi-Aladdin, you will know that they carbonize easy and can't be cleaned or repaired. Willi Springmann has solved the "problem" by making or better re-building
his own vaporizer. This "Springmann" vaporizer can be cleaned easy, just
dismantle it, and uses a 250 cp Petromax orifice. The pictures show how to make a vaporizer on a lathe. Re-building on your own risk ! |
 |
 |
 |
| The raw material. | Both ends are made plane. | Both ends get a center hole. |
 |
 |
 |
| Core drilling M7x1. | Cutting the thread M7x1. | "Clamping" with an old orifice. |
 |
 |
 |
| Resizing the rod to 11mm. | Centering the gauge. | By using the orifice, you can cut all the material. |
 |
 |
 |
| Drilling the main bore. | Don't distroy the thread on the other side. | Cutting the M10x0,75 thread. |
 |
 |
 |
| Cleaning the thread. | Almost ready. | Drilling hex. 17mm with 16mm. |
 |
 |
 |
| Cutting off the hex. | Hard soldering. | Cleaning. |
 |
 |
 |
| Making the needle spring.... | and it looks like this ..... | The cleaning needle is ready. |
 |
||
| READY !!! |
More cleaning needle pictures will follow.
Materiallist.
| Material | Tools | Vaporizer dimensions | |||||||||||
| Brass round | 12mm | Drill | 9,2mm | Length | 127mm | ||||||||
| Brass round | 2mm | or drill 8mm and drill | 9,2mm | Dimension round | 11mm | ||||||||
| Brass round | 3mm | Bore | 1,6mm | Orifice thread | M7x1 | ||||||||
| Hex. brass | SW4mm | Tap | M7x1 | Thread | M10x0,75 | ||||||||
| Hex. brass | SW17mm | Tap | M10x0.75 | Hole | 8mm / 9,2mm | ||||||||
| Nut | M2 | Tap | M2 | Hex. | SW17mm | ||||||||
| Ring | M2 | Threadcutter | M10x0,75 | ||||||||||
| Springsteel | 0,5mm | Theardcutter | M2 | ||||||||||
| Silver solder | |||||||||||||
| Solder agent | |||||||||||||
Copyright all pictures :Wilhelm Springmann
Torsten Scherning made the first german version of this page.